USB2.0 Type-C接口接線圖，usb轉typec接線方法

1、Pin A5 (CC) of the USB Type-C plug shall be connected to VBUS through a resistor Rp (56 k? ± 5%).
See Section 4.5.3.2.2 and Table 4-24 for the functional description and value of Rp.

2、Contacts B6 and B7 should not be present in the USB Type-C plug.

3、All VBUS pins shall be connected together within the USB Type-C plug. Bypass capacitors are not
required for the VBUS pins in this cable.

4、All Ground return pins shall be connected together within the USB Type -C plug.

5、Shield and GND grounds shall be connected within the USB Type -C and USB 2.0 Standard-A plugs on
both ends of the cable assembly.

6、All USB Type-C plug pins that are not listed in this table shall be open (not connected)

翻譯：

1、USB Type-C插頭的引腳A5（CC）應通過電阻器Rp（56 k? ± 5%).Rp的功能描述和值見第4.5.3.2.2節和表4-24。

2、USB Type-C插頭中不應存在觸點B6和B7。

3、所有VBUS引腳應在USB Type-C插頭內連接在一起。旁路電容器不是此電纜中的VBUS引腳需要。

4、所有接地返回引腳應在USB C型插頭內連接在一起。

5、屏蔽和GND接地應連接在USB類型-C和USB 2.0標準-A插頭內電纜組件的兩端。

6、本表中未列出的所有USB Type-C插頭引腳均應打開（未連接）